Packing Gland/Nut, P1100

Reference Number P1100-1005 -

Packing Rings, WCP - Set of 9

0915-0200 Each, sold as set of 9.

Packing Set, W50 / Cardox Pump

Complete set of rings, clean for either CO2 or Nitrous service

Piston - 1-3/4"

Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately)

Piston Assembly, 1.75"

Piston Assembly for either P2K or PD3000 Cold End Assembly.  Includes the following: (1) 0985-3039    56364-1 - Piston - 51-2533-05084 (3) 0985-3201 ...

Piston Ring 1.2 with Expander Ring - Set of 3

Piston Ring with SS expander ring set of 3, oxygen clean, commonly used on most horizontal pumps like CV, NDPD, DPD, SDPD, LXR, WDPD, used on 1.2" Piston Reference Numbers: 760002066 24960-1

Piston Ring Compression Tool

Use this tool when replacing the piston rings and rider rings on your horizontal cryo pump.  This will allow you to safely install the piston into the chamber without damaging the rings...

Piston Ring, 1.5" Set of 3

Piston Rings for Cryochem P1740 and Woodland / CryoVation's WCP 36 pump Reference: P1700-2015

Piston Rings, 1.0" - Set of 3

Set of 3 Piston Rings for a 1.0" Piston horizontal cryogenic reciprocating pump, common to LXR, CV, DPD, NDPD, WDPD, SDPD, etc.  Clean for Oxygen Service

Piston Rings, 1.25" (set of 3) - Cryochem and WCP

Made for 1.25" Piston vertical cryogenic pump models P1600 and WCP 27, sold in set of 3 since there is 3 per piston, clean for oxygen service 0914-8000 for each

Piston Seal, W50

Piston, 1.25"

Solid Brass Piston with hard chromed and ground shaft, clean for oxygen service Reference Numbers 16272-1 740002072