Product Description

Polar® Hose Introduction and Specifications

Evolution of the Best Hose for Effective CO2 Transfer

The Flexible Components brand of Polar® Hose overcomes the problems caused by misapplication of rubber hoses used in earlier CO₂ transfer applications. Typically, these were rubber hoses designed for hydraulic uses. They were not resistant to deterioration caused when rubber comes in contact with carbon dioxide. They had reinforcing braids and fittings made from carbon steel, which were susceptible to corrosion from carbonic acid that forms when CO₂ combines with moisture. They tended to crack, due to the cold temperatures associated with CO₂ transfer, and could become stiff, brittle and hard to handle.

Later attempts to use stainless steel cryogenic transfer hoses avoided some of these problems. Metal hose remainedf lexible in the cold but was much heavier and harder to handle. In addition, corrugations inside metal hose can trap solid CO₂ ice, causing plugging of hose, valves and pipes during CO₂ transfer.

We designed Polar Hose specifically for bulk CO₂ transfer. Polar Hose uses a specially formulated elastomer that is compatible with CO₂ and low temperatures. Stainless steel braids and non-corrosive fittings give Polar Hose strength and durability. Polar Hose is lightweight, flexible and strong -- the best choice for CO₂ bulk liquid transfer.

Hose Comparison

Specifications

Polar® Hose End Fittings

Photo: Female NPT
Sizes: 1", 1-1/2", 2"
Available in brass

CGA Connection

Sizes: 1", 1-1/2", 2"
Available in brass